Toys for Children > Toys on Sale > Pacifier BIBS Colour Round Hush in Pouch
https://www.tutete.com/tienda/en/96_toys-for-children/607_toys-on-sale/680_/691_smooth/85864_pacifier-bibs-colour-round-hush-in-pouch.html
85864
Pacifier BIBS Colour Round Hush in Pouch
https://www.tutete.com/tienda/images/6091511716540972-LG.jpg
3
EUR
InStock
94_sales-section
2024-05-23
1 Bibs Pacifier
Bibs
Bibs Colour Round
Exclusive and original design created and manufactured in Denmark by BIBS. These are pacifiers made of PP, BPA-free, phthalate-free, and PVC-free. They comply with EN1400+A2 standards and are regularly tested in Denmark by Consumer Lab Denmark. Additionally, they have successfully passed the latest tests conducted by our Quality Department in Europe.
In recent years, the brand's ability to manufacture these pacifiers in fashionable Pantones and its robust and matte-looking plastic has made them very popular on social networks.
Attention!
- The difference between the size 0-6M and the size 6-18M is barely noticeable to the eye. In the 0-6 months size, it is slightly shorter and wider at the bottom (the narrowest part).
- The brand advises changing the pacifier every 6 weeks, as natural rubber (regardless of the brand) tends to inflate and enlarge with use. This might cause the child to reject a new pacifier of the same size even though it is the same purchased before.
How to differentiate the different BIBS teats?
- Round: Soft round teat that mimics the mother's soft nipple and promotes tongue placement and sucking technique similar to breastfeeding.
- Symmetrical: Also called physiological. It promotes a sucking technique where the tongue is flat and presses the pacifier against the palate, so the baby does not need to suck hard.
- Anatomical: Curved teat on the upper part for a natural fit to the baby's palate with an angled tip to facilitate tongue placement.
Features
- Cannot be personalized
- Teat: round natural rubber teat
- 100% free of BPA, PVC, and phthalates
- Made in Denmark. Complies with the strict EN1400+A2 standards
- The manufacturer recommends changing the pacifier every 6 weeks
- Does not include a protective cap.
- We never recommend sterilization in the microwave. In this case, since it is a PP pacifier and assembled with the same rubber as the teat, uncontrolled high temperatures can cause the pacifier to disassemble. Our recommendation is to heat a pot of boiling water, remove it from the heat, and immerse the pacifiers for 2-5 minutes.
- If you cannot choose a size, it is out of stock
Measurements
- Teat 0-6M: length 25mm x width (at the narrow part) 11mm
- Teat 6-18M: length 30mm x width (at the narrow part) 10mm.
- Ring: 45 mm in diameter
- Comes in a hermetically sealed plastic bag