Soothers > Designer Soothers > 2 BIBS Colour Anatomical Pacifiers Vanilla/Pine
https://www.tutete.com/tienda/en/61_soothers/102_designer-soothers/81079_2-bibs-colour-anatomical-pacifiers-vanillapine.html
81079
2 BIBS Colour Anatomical Pacifiers Vanilla/Pine
https://www.tutete.com/tienda/images/5926871703602530-LG.jpg
10.95
EUR
InStock
61_soothers
61_soothers/102_designer-soothers
2023-12-05
Bibs
Bibs Colour
Bibs Colour Anatomical
2 Pacifiers Pack!
Exclusive and original design created and manufactured in Denmark by BIBS. These pacifiers are made of PP, free of BPA, phthalates, and PVC. They comply with the EN1400+A2 standard and are regularly tested in Denmark by Consumer Lab Denmark. Moreover, they have successfully passed the latest tests conducted by our Quality Department in Europe.
In recent years, the brand's ability to manufacture these pacifiers in trendy pantones and its robust and matte-looking plastic has made them very popular on social media.
Attention!
- The brand advises changing the pacifier every 6 weeks, as natural rubber (regardless of the brand) inflates and enlarges with use. This may cause a child to reject a new pacifier of the same size despite being the same one purchased.
How to differentiate the different BIBS nipples?
- Round: Soft round nipple that mimics the mother's soft nipple and promotes tongue placement and suction technique similar to breastfeeding
- Symmetrical: Also called physiological. Promotes a suction technique where the tongue is flat and presses the pacifier against the palate, so the baby does not need to suck as hard
- Anatomical: Curved nipple on the upper part for a natural fit to the baby's palate with an angled tip to facilitate tongue placement
Features
- Cannot be personalized.
- Nipple: anatomical natural rubber nipple
- 100% BPA, PVC, and phthalates free
- Manufactured in Denmark. Complies with the strict EN1400+A2 standard
- The manufacturer recommends changing the pacifier every 6 weeks
- Does not include protective cap.
- We never recommend sterilization in the microwave. In this case, as it is a PP pacifier whose assembly is done with the same rubber as the nipple, uncontrolled high temperatures can cause the pacifier to disassemble. Our recommendation is to heat a pot of boiling water, remove it from the heat, and dip the pacifiers for 2-5 minutes.
- If you cannot choose a size, it is out of stock
Measurements
- Nipple 0-6M: length 25mm x width (at the narrow part) 11mm
- Nipple 6-18M: length 30mm x width (at the narrow part) 10mm.
- Ring: 45 mm in diameter.