Soothers > Designer Soothers > 2 BIBS Colour Pacifiers Anatomical Sand/Iron
https://www.tutete.com/tienda/en/61_soothers/102_designer-soothers/65590_2-bibs-colour-pacifiers-anatomical-sandiron.html
65590
2 BIBS Colour Pacifiers Anatomical Sand/Iron
https://www.tutete.com/tienda/images/5507081663150878-LG.jpg
10.95
EUR
InStock
61_soothers
61_soothers/102_designer-soothers
2022-09-10
fresh days
fresh days BIBS
Sales BIBS
Pack of 2 pacifiers!
Exclusive and original design created and manufactured in Denmark by BIBS. These pacifiers are made of PP, free of BPA, phthalates, and PVC. They comply with the EN1400 standard and are regularly tested in Denmark by Consumer Lab Denmark. They have also successfully passed the latest tests conducted by our Quality Department in Europe.
In recent years, the brand's ability to manufacture these pacifiers in trendy pantone colors and their robust, matte-looking plastic has made them very popular on social media.
Attention!
- The brand recommends changing the pacifier every 6 weeks, as natural rubber (regardless of the brand) inflates and enlarges with use. This may cause a child to reject a new pacifier of the same size despite being the same one initially purchased.
How to differentiate the various BIBS nipples?
- Round: Soft round nipple that imitates the mother's soft nipple and promotes tongue placement and a suction technique similar to breastfeeding
- Symmetrical: Also called physiological. Promotes a suction technique where the tongue is flat and presses the pacifier against the palate, so the baby does not need to suck as hard
- Anatomical: Curved nipple at the top for a natural fit to the baby's palate with an angled tip to facilitate tongue placement
Features
- Cannot be personalized.
- Nipple: anatomical natural rubber nipple
- 100% free of BPA, PVC, and phthalates
- Manufactured in Denmark. Complies with the strict EN1400 standard.
- The manufacturer recommends changing the pacifier every 6 weeks
- No protective cap included.
- We never recommend microwave sterilization. And in this case, being a PP pacifier with the assembly done with the same rubber as the nipple, uncontrolled high temperatures can cause the pacifier to disassemble. Our recommendation is to heat a pot of boiling water, remove from heat, and place the pacifiers in for 2-5 minutes.
- If you cannot choose a size, it is out of stock
Measurements
- Nipple 0-6M: length 25mm x width (at the narrow part) 11mm
- Nipple 6-18M: length 30mm x width (at the narrow part) 10mm.
- Ring: 45 mm diameter.