Toys for Children > Toys on Sale > Chupete BIBS Colour Round Violet Sky in Pouch
https://www.tutete.com/tienda/en/96_toys-for-children/607_toys-on-sale/680_/691_smooth/83563_chupete-bibs-colour-round-violet-sky-in-pouch.html
83563
Chupete BIBS Colour Round Violet Sky in Pouch
https://www.tutete.com/tienda/images/6009771710932048-LG.jpg
3
EUR
InStock
96_toys-for-children
96_toys-for-children/691_smooth
2024-03-14
1 Bibs Pacifier
Bibs
Bibs Colour
Exclusive and original design created and manufactured in Denmark by BIBS. They are pacifiers made of PP, free of BPA, phthalates, and PVC. They comply with the EN1400+A2 standard and are regularly tested in Denmark by Consumer Lab Denmark. In addition, they have successfully passed the latest tests conducted by our Quality Department in Europe.
In recent years, the brand's ability to produce these pacifiers in fashionable pantones and with robust and matte-looking plastic has made them very popular on social media.
Attention!
- The difference between size 0-6M and size 6-18M is barely noticeable to the eye. In size 0-6 months, it is a little shorter and wider at the bottom (the narrowest part)
- The brand recommends changing the pacifier every 6 weeks because natural rubber (regardless of the brand) inflates and enlarges with extensive use. This may cause the child to reject a new pacifier of the same size even though it is the same one purchased.
How to differentiate the different BIBS teats?
- Round: Soft round teat that mimics the mother's soft nipple and promotes tongue placement and a suction technique similar to breastfeeding
- Symmetrical: Also called physiological. Promotes a suction technique where the tongue is flat and presses the pacifier against the palate, so the baby does not need to suck as hard
- Anatomical: Curved teat on the upper part for a natural fit to the baby's palate with an angled tip to facilitate tongue placement
Features
- Cannot be personalized
- Teat: natural rubber round teat
- 100% BPA, PVC, and phthalate-free
- Made in Denmark. Complies with the strict EN1400 +A2 standard
- The manufacturer recommends changing the pacifier every 6 weeks
- Does not include a protective cap.
- We never recommend sterilization in the microwave. And in this case, being a PP pacifier and assembled with the same rubber as the teat, uncontrolled high temperatures may cause the pacifier to disassemble. Our recommendation is to heat a pot of boiling water, remove from heat, and immerse the pacifiers for 2-5 minutes.
- If you cannot select a size, it is out of stock
Measurements
- Teat 0-6M: length 25mm x width (at the narrow part) 11mm
- Teat 6-18M: length 30mm x width (at the narrow part) 10mm.
- Washer: 45 mm diameter
- Comes in a hermetically sealed plastic bag