Toys for Children > Toys on Sale > 2 BIBS Colour Night Pacifiers Round Blush Glow/Woodchuck Glow
https://www.tutete.com/tienda/en/96_toys-for-children/607_toys-on-sale/679_personalized-pacifiers/687_bibs-pacifiers/89698_2-bibs-colour-night-pacifiers-round-blush-glowwoodchuck-glow.html
89698
2 BIBS Colour Night Pacifiers Round Blush Glow/Woodchuck Glow
https://www.tutete.com/tienda/images/6251051732634054-LG.jpg
10.95
EUR
InStock
96_toys-for-children
96_toys-for-children/687_bibs-pacifiers
2024-10-10
Bibs
Bibs Blush
Bibs Colour
¡Pack of 2 pacifiers!
Exclusive and original design created and manufactured in Denmark by BIBS. These are pacifiers made of PP, free from BPA, phthalates, and PVC. They comply with the EN1400+A2 standard and are regularly tested in Denmark by Consumer Lab Denmark. They have also successfully passed the latest tests conducted by our Quality Department in Europe.
In recent years, the brand's ability to manufacture these pacifiers in fashionable pantones and their robust and matte plastic appearance have made them very popular on social media.
¡Attention!
- The difference between size 0-6M and size 6-18M is barely noticeable to the eye. The size 0-6 months is a bit shorter and wider at the bottom (the narrowest part)
- The brand recommends changing the pacifier every 6 weeks, as natural rubber (of any brand) swells and enlarges with extensive use. This may cause the child to reject the teat despite it being the same as the one previously purchased when buying a new pacifier of the same size.
How to differentiate BIBS teats?
- Round: Soft round teat that mimics the mother's nipple and promotes a tongue placement and suction technique similar to breastfeeding
- Symmetrical: Also called physiological. Promotes a suction technique where the tongue is flat and presses the pacifier against the palate, so the baby doesn't need to suck as hard
- Anatomical: Curved teat at the top for a natural fit to the baby's palate with an angled tip to facilitate tongue placement
Features
- Cannot be personalized.
- Teat: round natural rubber latex teat
- 100% free of BPA, PVC, and phthalates
- Made in Denmark. Complies with the strict EN1400+A2 standard
- The manufacturer recommends changing the pacifier every 6 weeks
- Does not include a protective cap.
- We never recommend sterilization in the microwave. In this case, being a PP pacifier and assembled with the same rubber as the teat, uncontrolled high temperatures can cause the pacifier to become disassembled. Our recommendation is to heat a pot of boiling water, remove it from the heat, and immerse the pacifiers for 2-5 minutes.
- If you cannot choose a size, it is out of stock
Measurements
- Teat 0-6M: length 25mm x width (at the narrowest part) 11mm
- Teat 6-18M: length 30mm x width (at the narrowest part) 10mm.
- Ring: 45 mm in diameter.