Soothers > Designer Soothers > 2 BIBS Colour Round Pacifiers Vanilla/Candy Apple
https://www.tutete.com/tienda/en/61_soothers/102_designer-soothers/91889_2-bibs-colour-round-pacifiers-vanillacandy-apple.html
91889
2 BIBS Colour Round Pacifiers Vanilla/Candy Apple
https://s3.eu-west-1.amazonaws.com/dev-cdn.tutete.com/admin/assets/images/productos/6/2/6/2/1/6/626216-1200x1000.jpg
10.95
EUR
InStock
61_soothers
61_soothers/102_designer-soothers
2024-12-17
Bibs
Bibs Candy Apple
Bibs Colour
Pack of 2 Pacifiers!
Exclusive and original design created and manufactured in Denmark by BIBS. These pacifiers are made of PP, without BPA, phthalates, or PVC. They comply with the EN1400 +A2 standard and are regularly tested in Denmark by Consumer Lab Denmark. Additionally, they have successfully passed the latest tests conducted by our Quality Department in Europe.
In recent years, the brand's ability to manufacture these pacifiers in trendy pantones and its robust, matte plastic appearance have made them very popular on social networks.
Attention!
- The difference between size 0-6M and size 6-18M is barely noticeable to the eye. In the 0-6 months size, it is a bit shorter and wider at the bottom (the narrowest part)
- The brand advises changing the pacifier every 6 weeks because natural rubber (regardless of the brand) inflates and enlarges with extensive use. This can cause a child to reject a new pacifier of the same size, despite it being the same one purchased previously.
How to differentiate the different BIBS nipples?
- Round: Soft round nipple that resembles the mother's nipple, promoting a tongue placement and a sucking technique similar to breastfeeding
- Symmetrical: Also called physiological. Promotes a sucking technique where the tongue is flat and presses the pacifier against the palate, so the baby doesn't need to suck as strongly
- Anatomical: Curved nipple on the top for a natural fit to the baby's palate with an angled tip to facilitate tongue placement
Features
- Cannot be personalized.
- Nipple: round natural rubber nipple
- 100% free from BPA, PVC, and phthalates
- Manufactured in Denmark. Complies with the strict EN1400+A2 standard.
- The manufacturer recommends changing the pacifier every 6 weeks
- No protective cap included.
- We never recommend sterilization in the microwave. In this case, being a PP pacifier whose assembly is done with the same rubber as the nipple, uncontrolled high temperatures may cause the pacifier to disassemble. Our recommendation is to heat a pot of boiling water, remove it from the heat, and place the pacifiers in it for 2-5 minutes.
Measurements
- Nipple 0-6M: length 25mm x width (at the narrow part) 11mm
- Nipple 6-18M: length 30mm x width (at the narrow part) 10mm.
- Ring: 45 mm in diameter.