Soothers > Designer Soothers > 2 BIBS Colour Round Latex Pacifiers Khaki/Dusty Blue
https://www.tutete.com/tienda/en/61_soothers/102_designer-soothers/64395_2-bibs-colour-round-latex-pacifiers-khakidusty-blue.html
64395
2 BIBS Colour Round Latex Pacifiers Khaki/Dusty Blue
https://www.tutete.com/tienda/images/5492021663140591-LG.jpg
8
EUR
InStock
61_soothers
61_soothers/102_designer-soothers
2022-07-12
fresh days
fresh days BIBS
Sales BIBS
¡Pack of 2 Pacifiers!
Exclusive and original design created and manufactured in Denmark by BIBS. These pacifiers are made of PP, free of BPA, phthalates, and PVC. They comply with the EN1400 standard and are regularly tested in Denmark by Consumer Lab Denmark. Furthermore, they have successfully passed the latest tests conducted by our Quality Department in Europe.
In recent years, the brand's ability to manufacture these pacifiers in trendy Pantones and its robust matte plastic appearance has made them very popular on social networks.
Attention!
- The difference between size 0-6M and 6-18M is barely noticeable to the eye. In the 0-6 months size, it is slightly shorter and wider at the bottom (the narrowest part)
- The brand advises changing the pacifier every 6 weeks because natural rubber (no matter the brand) inflates and enlarges with use. This may lead to the child rejecting a new pacifier of the same size despite being the same as the one purchased.
How to differentiate the various BIBS nipples?
- Round: Soft round nipple that mimics the mother's soft nipple and promotes tongue placement and a sucking technique similar to breastfeeding
- Symmetrical: Also called physiological. Promotes a sucking technique where the tongue is flat and presses the pacifier against the palate so the baby doesn't need to suck as hard
- Anatomical: Nipple curved at the top for a natural fit to the baby's palate with an angled tip to facilitate tongue placement
Features
- They cannot be personalized.
- Nipple: round natural rubber nipple
- 100% BPA, PVC, and phthalate-free
- Made in Denmark. Complies with the strict EN1400 standard.
- The manufacturer recommends changing the pacifier every 6 weeks
- Does not include a protection cap.
- We never recommend microwave sterilization. In this case, as it is a PP pacifier with the same rubber assembly as the nipple, uncontrolled high temperatures can cause the pacifier to disassemble. Our recommendation is to heat a pot of boiling water, remove from heat, and place the pacifiers in for 2-5 minutes.
- If you cannot choose a size, it is out of stock.
Measurements
- Nipple 0-6M: length 25mm x width (at the narrow part) 11mm
- Nipple 6-18M: length 30mm x width (at the narrow part) 10mm.
- Ring: 45 mm in diameter.
- The manufacturer recommends changing the pacifier every 6 weeks
- Does not include a protection cap.
- We never recommend microwave sterilization. In this case, as it is a PP pacifier with the same rubber assembly as the nipple, uncontrolled high temperatures can cause the pacifier to disassemble. Our recommendation is to heat a pot of boiling water, remove from heat, and place the pacifiers in for 2-5 minutes.
Measurements
- Nipple 0-6M: length 25mm x width (at the narrow part) 11mm
- Nipple 6-18M: length 30mm x width (at the narrow part) 10mm.
- Ring: 45 mm in diameter.